How to convert a DVD to VCD
This is one of the best methods to produce excellent
quality VideoCD's from DVD's. This guide will help you produce VideoCD’s that
can be played on PC’s, PSX Movie adaptors and all standalone VCD & DVD
players that can play home-burned VCD’s. Only 4 software titles need to be
installed and all are relatively small in size. The best bit of all is that the
software is Freeware or Demo ware with results comparable to commercially
available software. The final VCD is better quality than most Original VCD’s,
equal or better than standard VHS and the sound is near CD quality. Although
this guide uses CladDVD to rip (remove the DVD copy protection and transfer the
movie files to your Hard Drive) the movie off the DVD, other freeware rippers
can also be used. These include VobDecGUI and DOD SpeedRipper. The actual
encoding to VCD is done by bbMPEG, which is freeware and now bundled with the
latest version of the freeware FlaskMPEG. Other commercially available Adobe®
Premier Plug-in’s can also be used and are detailed in the FlaskMPEG Help file.
Software you will need:
1. CladDVD 1.64 (It can be
found at http://members.netscapeonline.co.uk/claddvd/)
2. FlaskMPEG 0.594 (It can be found at http://go.to/flaskmpeg)
3. TMPGEnc 12a & English patch (It can be found at
http://www.jamsoft.com/tmpgenc/)
4. Nero 5.x (It can be found at http://www.ahead.de)
5. WinOnCD
3.6+ (It can be found on Morpheus)
You will also need a Computer with:
Windows 95B, 95C, 98, 98SE, ME, NT sp4 or 2000 installed.
A Pentium II 300 MMX or equivalent as a minimum.
At least 64meg memory
An internal DVD Rom player (any speed)
Hard drive with at least 4 gb, but prefrably 10 gb FREE
space in one partition.
WinZip and WinRAR or WinAce (whick will handle all types;
zip, rar, ace, cab..etc) to extract the files above. Fully functional demo
versions can be downloaded from http://www.winzip.com/, http://www.rarsoft.com/
and http://www.winace.com/
A CDR(W) Burner to produce the VideoCD and a box of good
quality CDRs or CDRWs
A sound card to check the finished product.
Tips before we
get started
Turn off your Screen Saver, it will simply slow the
conversion down by hours.
Do not run any other program in the background while
FlaskMPEG is running, especially if you have a slower computer.
Turn the screens colour depth to 16bit colour or better.
Re-boot the computer just BEFORE you start the ripping,
in this way you have the best conditions as possible.
So you have
downloaded the software and cecked that you have the right stuff in your
computer. Sounds good, then lets get
stuck into it!
Step 1: Getting
Ready.
1. Install cladDVD (or any
other ripper, works somewhat in the same way)
2. Install FlaskMPEG (this
also installs the bbMPEG encoder automatically)
3. Install TMPGEnc and then
run the English patch, but only if you can’t read Japanese!
4. Install Nero.
Step 2: Copying
DVD files to hard drive.
1. Put the DVD movie into
your DVD Rom player. Sounds simple so far, doesn’t it?
2. Make a directory on your
Hard Drive called VIDEO_TS (same as it appears on the DVD).
3. Run cladDVD and select
the Destination Directory to point to the VIDEO_TS directory you just made.
4. Selecting Decrypt Movie
to start ripping the .VOB files of the DVD to your hard drive. This can take up
to 30 minutes.
5. If you are limited to 4
gig of hard drive space, then just rip the first 2 VOB files, which is about
2gb by highlighting the first two 1 gig files and select Decrypt Files.
6. For the rest of you who
can copy the whole movie, then copy the .IFO file also to the VIDEO_TS
directory. The .IFO file to copy is the one that is number-in-sequence to your
.VOB file.
A typical directory of a DVD will be similar to :
VIDEO_TS BUP
16,384
VIDEO_TS IFO
16,384
VIDEO_TS VOB
43,008
VTS_01_0 BUP
77,824
VTS_01_0 IFO
77,824 - This selects Language/Subtitles
VTS_01_0 VOB
1,695,744
VTS_01_1 VOB
1,073,565,696 \
VTS_01_2 VOB
1,073,565,696 \ This is the
Main movie
VTS_01_3 VOB
1,073,565,696 /
VTS_01_4 VOB
589,365,248 /
VTS_02_0 BUP
18,432
VTS_02_0 IFO
18,432
VTS_02_0 VOB
43,008
VTS_02_1 VOB
6,014,976
Step 3:
Conversion.
1. Run FlaskMPEG. Click on
File, then choose Open File if you have only copied parts of the movie. Choose
Open DVD if you have copied the entire movie and its IFO file. For Open Files
click on the first 1 gig VOB file (VTS_01_1.VOB) and FlaskMPEG will see all the
remaining VOB’s as one file. The first Audio track (one with lowest number i.e.
0x80) is normally English. For Open DVD, click on the IFO file. You should get
a box showing all the video, language and subtitle options. Choose the options
you want, normally there is only one video option, a selection of languages and
subtitles, with the option for no subtitles. Highlight your choice.
2. Now go to Options then
Select Output Format and make sure bbMPEG Encoder is the selected output
format. If it is not, then click on its name.
3. Now select Global Output
Options.
In Video
tab, change the Width to 352 and Height to 288 for PAL movies @ 25fps, 352x240
for NTSC @ 29,97 or 30 fps and 352x240 for film @ 23.976fps. Time Base (fps) should be 25 for
PAL etc see above. iDTC Options should be on MMX iDCT for fast encoding
(assuming your computer's processor is MMX compatible)
In Audio tab, for Audio Mode select Decode Audio.
For Sampling Frequencies un-select Same as Input and choose 44100 Hz, this is
an essential Video CD setting.
In Post Processing tab, select Bicubic
Filtering or HQ Bicubic Filtering (I recommend the latter as it gives the best
quality picture, but is the slowest). Ensure Keep Aspect Ratio is selected. The
No Crop and No Letterboxing should be selected also. These settings can be used
creating a Super Video CD, where the frame size differs from a VCD.
In Files tab, pick an output file name including full path, no extension needed. (
ie. D:\RIP\GLADIATOR )
In General tab, un-select Compile Whole File
and enter the Compiling Time (movie length) in seconds. (I recommend you enter
the Compiling time, otherwise bbMPEG assumes th movie is 3hrs, 20mins). If it
suits you, select Shut Down Computer
4. Now hit OK.
5. From the pull-down menu
Run, select Start Conversion. The bbMPEG Encoder table will pop up. Click
Settings and,
a.
In General Settings tab, for MMX Modes select the one that best describes your
computer, under Encoding select both Video and Audio. Under Multiplexing
de-select both Multiplex Video and Multiplex Audio.
b.
In Video Stream Settings tab, select PAL Defaults if a PAL movie (otherwise it
defaults to NTSC) and for Video Type, select VideoCD, hit OK.
All is now
ready, so click Start. On the pop-up FlaskMPEG window, change Priority Settings
to Highest, as thiscan speed up the conversion.
6. Now comes the easy part.
The conversion process (encoding) will now starts and will take quite a long
time, so do it while you sleep or at work. Some do it during both! As a guide,
on a Pentium II 350 it takes about 14h to convert 1hr of movie, on an AMD K6-2
450 it takes about 10hr and on an Athlon 650 it takes about 6hr to convert 1hr
of movie. I also turn my monitor off while this is all happening no need to
watch the movie in super super slow motion.
7. After it is all
finished, you will have 2 new files on your HD. One ending in M1V (the Video
file) and the other in MP2 (the Audio file). The Audio file is normally about a
¼ of the size of the Video file. If all is well, then we can delete the VOB
files on your HD to free up some space.
Step 4: Multiplex.
1. Although bbMPEG can
Multiplex (join the separate Video and Audio files together) your Video and
Audio files to an MPEG stream, TMPGEnc makes 100% fully compliant MPEG files
and is quicker.
2. Run TMPGEnc and click on
File and then MPEG Tools. Go to the Simple Muliplex tab. Browse for your Video
file and the Audio and Output files will automatically be named. Rename the
Output file if you prefer. For Type, select MPEG-1 VideoCD. Hit OK to multiplex
them. This just joins the separate Video and Audio files to the final VideoCD
MPEG file. Exit the program.
3. Now play the new mpeg
file with Windows Media Player to see if it is okay, checking for Video &
Audio synchronization (lip-sync) near start and end of the movie. You have now
created your first MPEG-1 video file in the VideoCD format. Easy, wasn’t it!
Step 5: Cutting.
1. For those short on HD
space and only converted 2 VOB files or the movie is not longer than 72min or
78min, you skip the cutting process and go to straight to Burning.
2. If you converted the
whole DVD movie into a single mpeg file and the movie is longer than 72min or
78min, you will need to cut it to fit onto a 74min or 80min CDR. Most movies
tend to be 1½ hrs to 2 hours long so just cut it in half to fit onto 2 standard
74min/650meg CDR’s. You can get 72min onto a 74min/650meg CDR and 78min onto a
80min/700meg CDR
3. Run TMPGEnc, from Files
select MPEG Tools. Then select Cut/Join Tab. Click Add and load in your new
mpeg file. Double click on its name and a new window opens. Use the [ & ]
to mark the Start (lead-in) and End (lead-out) of each clip. So click [ to mark
Start, then slide the Pointer to approx the mid-point in the movie. Click
]. You can fine-tune the positions by
altering the times in the Range box’s by using the up & down arrows. Click
OK to return to original screen. For Type, select MPEG-1 VideoCD. Give an
Output name (eg. disk1.mpg) and click Start. A few minutes later you will have
the MPEG file for Disk 1. Now double click the file name again. 5 sec of disk 1
will be the first 5 sec of disk 2 so you don’t miss any of the action. Click
OK, for Type, select MPEG-1 VideoCD. Give an Output name (eg. disk2.mpg) and
click Start. It appears to be doing nothing for a while but be patient, a few
minutes later you will have the MPEG file for Disk 2. Then exit the program.
4. It’s a good idea to load
each mpeg file into Windows Media Player (comes with all versions of Windows)
and check that it’s okay and that the Video and Audio are synchronized (lip
movements should match with should, big problem for German and Spanish
synchronized movies (). Check at the start and near the end of each file. If
all is okay, we are ready to burn.
Step 5: Burning.
1. Run Nero (or WinOnCD).
Click the VideoCD tab, select Create Standard Compliant CD. In Volume
Descriptor tab, enter a Volume Label, such as THE_GLADIATOR_1 for disk 1 of the
Gladiator. Click on New and then drag & drop the Disk1 mpg file from the
right window (your HD) to the left window (the VCD disk). Nero will check
through the mpeg file to confirm that it is a compliant VCD file. After it
finishes checking the file, click the Burn Button. Select the Write Speed to be
4x maximum and make sure Disk-At-Once is NOT ticked. Then click Write and sit
back and watch your first VCD disk being burnt. The excitement builds. When the
burning is finished, label the CD and rush to your VCD/DVD player to check it
out. If all is okay, repeat this for the second or third disks remembering to change
the Volume Label. Refer to Nero’s Help for further info and clarification on
how to use Nero.
2. Use only good quality
scratch resistant CDR’s. Recommendable brands are: Sony, Fuji, Verbatim, TDK,
Mitsui and Ricoh. Some DVD stand-alone players will only read from CDRW’s, then
burn to CDRW’s instead. Burning at greater then 4x speed can also make the VCD
unreadable by many players, particularly the PSX.
3. You have now produced
your first playable fully compliant VCD. Wasn’t that fun!
4. If you only converted 2
VOB files, they will generally yield 45-52 minutes of movie. After burning the
first half of the movie you will have to repeat step 3 to 5 again for the
second half of the movie.